CortecLogo3dlt.gif iso.gif

Corrosorber® Liquid
Corrosorber Liquid is a concentrated solution of nitrogen based heterocyclic compound. It is formaldehyde free and can be used to scavenge hydrogen sulfide (H2S), mercaptans, sulfides, and sulfur compounds from gas systems or liquid hydrocarbons. Corrosorber liquid is an extremely fast reacting product allowing for lower levels of treated H2S where contact time is restricted. Faster reaction kinetics allow for lower usage of treating chemical.
Hydrogen Sulfide is a poisonous gas that is deadly at high concentrations and provides serious health threats at moderate concentrations. Operating problems caused by H2S can include severe corrosion and fouling, and injection well plugging with iron sulfides.

Corrosorber Liquid is installed in batch reaction towers or it is injected continuously into gas gathering lines, transmission lines, vapor overheads, or liquid product systems of pipelines. It can be applied in either flowline or bubble tower applications. Typically the bubble tower should be filled to approximately 50% full to prevent the product from being carried downline.

Corrosorber Liquid can be diluted with water or methanol for ease of application. Water containing reacted product can be reused in the water cycle, including water gathering lines, water tanks, holding pits, vapor overheads, or injected down disposal wells.
Corrosorber Liquid is available in 5 gallon (19 liter) pails and 55 gallon (208 liter) drums.

Do not store above 120°F (49°C). Keep container closed and upright.
View Product Data Sheet


View Editorials and Technical Articles

View Safety Data Sheet



Cortec®, MCI®, VpCI®-126 Blue®, EcoFilm®, EcoWorks®, Rawn® and Bull Frog® are registered trademarks of Cortec Corporation.

Last modified: June 07 2017 05:43:48.