CortecLogo3dlt.gif iso.gif
CORTEC PRODUCT INFORMATION


VpCI®-392
Description: VpCI-392 is a self-crosslinking, anionic NMP free and APEO free dispersion of a modified aliphatic urethane in water. VpCI-392 is designed for industrial coatings applications requiring good gloss, clarity, chemical resistance, and adhesion to a variety of substrates and primers.

Primarily designed as a top coat over recommended primers; VpCI-375, VpCI-395, and VpCI-396, this coating also exhibits excellent adhesion (DTM) over difficult substrates such as; aluminum, brass, and copper.

VpCI-392 has excellent wetting properties, high gloss and can be prepared in most colors. Recommended uses for VpCI-392 include metal, (DTM), top coat on primed substrates, concrete, and wood.
Application: VpCI-392 may be applied by spray or brush. A film thickness of 1-2 dry mils (25-50 microns) is recommended. The coating dries to touch in 30-40 minutes; however it takes approximately one week before the coating achieves 100% of its physical properties.
Protection: Carbon steel
Stainless steel
Galvanized
Aluminum
Brass
Copper
Concrete
Wood
Package: VpCI-392 is available in 5 gallon (19 liter) metal pails. One gallon pails available upon request.

Important: A partially used container must be purged with nitrogen to prevent a reaction in the can if it is not used within one day!
View Product Data Sheet

VpCI-392.pdf

View Editorials and Technical Articles

View Safety Data Sheet
 
 
 

 

   
 

Cortec®, MCI®, VpCI®-126 Blue®, EcoFilm®, EcoWorks®, Rawn® and Bull Frog® are registered trademarks of Cortec Corporation.

Last modified: June 07 2017 05:43:48.