* * * * * * * * * * * * * * VpCI™-130 Series * * * * * * * * * * * * * * *

PRODUCT DESCRIPTION: A polyurethane foam impregnated with a proprietary corrosion inhibitor.

Carcinogenic: OSHA = no NTP = no IARC = no

COLOR: Off-white to beige ODOR: Slight

PHYSICAL FORM: Open cell foam

NON-VOLATILE (weight): >96% pH: N.A.

VAPOR DENSITY: N.E. MELTING RANGE: N.A.

VAPOR PRESSURE: N.E. BOILING RANGE: N.E.

EVAPORATION RATE: N.E. DENSITY: N.A.

HMIS FLAMMABILITY RATING: 1

FLASH POINT: N.E.

FLAMMABLE LIMITS: LEL: N.E. UEL: N.E.

EXTINGUISHING MEDIA: Water, carbon dioxide or other dry chemical fire fighting agents.

UNUSUAL FIRE AND EXPLOSION HAZARDS: Polyurethane foam burns very rapidly forming thick smoke and possible toxic decomposition products.

SPECIAL FIRE FIGHTING PROCEDURES: Firefighters should wear self-contained breathing apparatus.

EMERGENCY AND FIRST AID PROCEDURES:

Eye Contact: Flush eyes with water for at least 15 minutes. Consult a physician. Skin Contact: Wash affected area with soap and water. If irritation persists, consult a physician. Inhalation: Remove to an uncontaminated area, administer oxygen if necessary. If victim has stopped breathing begin CPR. Get medical attention. Ingestion: If swallowed, give water or milk and induce vomiting. Get immediate medical attention.

MEDICAL CONDITIONS PRONE TO AGGRAVATION BY

EXPOSURE: None known

PRIMARY ROUTES OF ENTRY: Eye contact, Skin contact

HEALTH HAZARDS (acute and chronic) / EFFECTS OF OVEREXPOSURE:

1. Eye contact with this product may produce irritation.

2. Repeated or prolonged contact may cause mild skin irritation.

3. Inhalation of product vapors is not expected to pose a significant health hazard due to the low vapor pressure of the product.

4. Ingestion of this product may be harmful.

STABILITY: Stable

HAZARDOUS POLYMERIZATION: Will not occur.

HAZARDOUS DECOMPOSITION PRODUCTS (Under fire conditions): Burning polyurethane foams produce toxic decomposition products that are not significantly different from those of other nitrogen-containing polymer such as wool, leather, nylon, and ABS. The major toxicants are carbon monoxide, oxides of nitrogen, hydrogen cyanide.

INCOMPATIBILITY: Strong acids, alkalis and oxidizing agents.

CONDITIONS TO AVOID: Contact with incompatible materials.

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Collect as normal solid waste.

WASTE DISPOSAL: Dispose of in accordance with existing Federal, State and Local environmental regulations.

RESPIRATORY PROTECTION: A NIOSH approved dust/mist respirator if necessary.

PROTECTIVE GLOVES: Chemical resistant rubber or plastic.

EYE PROTECTION: Safety goggles.

OTHER PROTECTIVE EQUIPMENT: Eye wash station.

SECTION IX - SPECIAL PRECAUTIONS AND STORAGE PRECAUTIONS TO BE TAKEN IN HANDLING: Avoid eye contact and prolonged or repeated skin contact. Workers should thoroughly wash hands with soap and water prior to eating, drinking, smoking and using lavatory.

PRECAUTIONS TO BE TAKEN IN STORING: Keep storage containers tightly closed. Store in a cool dry place. Store away from foodstuffs

DOT/IMDG/IATA SHIPPING NAME: N.A.

U.N. / N.A. NUMBER: N.A.

DOT/IMDG/IATA HAZARD CLASS.: N.A.

T.S.C.A. STATUS: Listed

DOT/IMDG/IATA REQUIRED LABELS: N.A.

TECHNICAL SHIPPING NAME: N.A.

PREPARED BY: Bob Berg, Pkg. Development Specialist

APPROVED BY: Margarita Kharshan, Lab. Director

DATE PREPARED: 10/31/02 SUPERSEDES: 9/2/99

DISCLAIMER: This information is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of the Cortec Corporation. The data on this sheet relates only to the specific material designated herein. The Cortec Corporation assumes no legal responsibility for use or reliance upon this data.

N.E. = NOT ESTABLISHED N.A. = NOT APPLICABLE