|
MATERIAL
SAFETY DATA SHEET
THE
CORTEC CORPORATION
4119
WHITE BEAR PARKWAY
ST.
PAUL, MINNESOTA 55110
PHONE:
612-429-1100 OR TOLL FREE 1-800-4-CORTEC
FAX:
612-429-1122
EMERGENCY
PHONE NO.: CHEMTREC (FOR SPILL, LEAK, FIRE, EXPOSURE OR ACCIDENT):
1-800-424-9300 (DAY OR NIGHT)
*************VCI-150
& VCI-170 Tape************
SECTION
I - PRODUCT IDENTIFICATION
PRODUCT
NAME: VCI-150
& VCI-170 Tape
PRODUCT
DESCRIPTION: An adhesive backed polyurethane foam in tape form impregnated
with a proprietary corrosion inhibitor.
SECTION
II - HAZARDOUS INGREDIENTS
|
INGREDIENT
NAME(S)
|
WEIGHT
PERCENT
|
OCCUPATIONAL
EXPOSURE LIMITS
|
| |
TLV
OR PEL
|
ORAL
LD-50
|
|
Trade
Secret
|
3-5
%
|
10
mg/m3
(ACGIH)
15
mg/m3
(OSHA)
(as
nuisance dust)
|
675
mg/kg-rat
|
Carcinogenic:
OSHA = no NTP = no IARC = no
SECTION
III - PHYSICAL DATA
COLOR: Off white to Yellow
PHYSICAL FORM: Open cell
foam
ODOR: Slight NON-VOLATILE(weight):
>96%
pH: N.A. VAPOR
DENSITY: N.E.
MELTING RANGE: N.A.
VAPOR PRESSURE: .N.E.
BOILING RANGE: N.E.
EVAPORATION RATE: N.E.
WEIGHT
GALLON: N.A.
SECTION
IV - FIRE AND EXPLOSION DATA
FLAMMABILITY
CLASSIFICATION: 1
FLASH
POINT: N.E.
FLAMMABLE
LIMITS: LEL: N.E. UEL: N.E.
EXTINGUISHING
MEDIA: Water, carbon dioxide or other dry chemical fire fighting
agents.
UNUSUAL
FIRE AND EXPLOSION HAZARDS: Polyurethane foam burns very rapidly
forming thick smoke and possible toxic decomposition products.
SPECIAL
FIRE FIGHTING PROCEDURES: Firefighters should wear self contained
breathing apparatus.
SECTION
V - HEALTH HAZARD DATA
EMERGENCY
AND FIRST AID PROCEDURES:
Eye
Contact: Flush eyes with water for at least 15 minutes. Consult
a physician. Skin Contact: Wash affected area with soap and
water. If irritation persists, consult a physician. Inhalation:
Remove to an uncontaminated area, administer oxygen if necessary.
If victim has stopped breathing begin CPR. Get medical attention.
Ingestion: If swallowed, give water or milk and induce vomiting.
Get immediate medical attention.
MEDICAL
CONDITIONS PRONE TO AGGRAVATION BY
EXPOSURE:
None known
PRIMARY
ROUTES OF ENTRY: Eye contact, Skin contact
HEALTH
HAZARDS (acute and chronic) / EFFECTS OF OVEREXPOSURE:
1. Eye
contact with this product may produce irritation.
2. Repeated
or prolonged contact may cause mild skin irritation.
3. Inhalation
of product vapors is not expected to pose a significant health
hazard due to the low vapor pressure of the product.
|
4. Ingestion
of this product may be harmful.
SECTION
VI - REACTIVITY DATA
STABILITY:
Stable
HAZARDOUS
POLYMERIZATION: Will not occur.
HAZARDOUS
DECOMPOSITION PRODUCTS:(Under fire conditions) Burning polyurethane
foams produce toxic decomposition products which are not significantly
different from those of other nitrogen-containing polymer such as
wool leather , nylon, and ABS. The major toxicants are carbon monoxide,
oxides of nitrogen, hydrogen cyanide.
INCOMPATIBILITY:
Strong acids, alkalis and oxidizing agents.
CONDITIONS
TO AVOID: Contact with incompatible materials.
SECTION
VII - SPILL OR LEAK PROCEDURES
STEPS
TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Collect as
normal solid waste.
WASTE
DISPOSAL: Dispose of in accordance with existing Federal, State
and Local environmental regulations.
SECTION
VIII - SAFE HANDLING AND USE INFORMATION
RESPIRATORY
PROTECTION: A NIOSH approved dust/mist respirator is recommended.
PROTECTIVE
GLOVES: Chemical resistant rubber or plastic.
EYE PROTECTION:
Safety goggles.
OTHER
PROTECTIVE EQUIPMENT: Eye wash station.
SECTION
IX - SPECIAL PRECAUTIONS AND STORAGE DATA
PRECAUTIONS
TO BE TAKEN IN HANDLING: Avoid eye contact and prolonged or repeated
skin contact. Workers should thoroughly wash hands with soap and
water prior to eating, drinking, smoking and using lavatory.
PRECAUTIONS
TO BE TAKEN IN STORING: Keep storage containers tightly closed.
Store in a cool dry place. Store away from foodstuffs
SECTION
X - SHIPPING DATA
DOT SHIPPING
NAME: N.A. U.N. / N.A. NUMBER: N.A.
DOT HAZARD
CLASS.: N.A. T.S.C.A. STATUS: Listed
DOT REQUIRED
LABELS: N.A.
TECHNICAL
SHIPPING NAME: N.A.
FREIGHT
CLASS BULK: Same as above
LTL: 70 TL:
40 MW: 30
PREPARED
BY: Joe Foley, Technical Advisor
APPROVED
BY: Boris Miksic, President
DATE PREPARED:
1/30/95
DISCLAIMER:
This information is furnished without warranty, expressed or implied,
except that it is accurate to the best knowledge of the Cortec Corporation.
The data on this sheet relates only to the specific material designated
herein. The Cortec Corporation assumes no legal responsibility for
use or reliance upon this data.
N.E. =
NOT ESTABLISHED N.A. = NOT APPLICABLE
|
