![]() |
||||
![]() |
||||
|
MATERIAL SAFETY DATA SHEET THE CORTEC CORPORATION 4119 WHITE BEAR PARKWAY ST. PAUL, MINNESOTA 55110 PHONE: 651-429-1100 OR TOLL FREE 1-800-4-CORTEC FAX: 651-429-1122 EMERGENCY PHONE NO.: CHEMTREC (FOR SPILL, LEAK, FIRE, EXPOSURE OR ACCIDENT): 1-800-424-9300 (DAY OR NIGHT) * * * * * * * * * CorrLube 15W-40 * * * * * * * * * * * * SECTION I - PRODUCT IDENTIFICATION PRODUCT NAME: CorrLube 15W-40 PRODUCT DESCRIPTION: A proprietary blend of corrosion inhibitors in an oil carrier. SECTION II - INGREDIENTS
Carcinogenic: OSHA = no NTP = no IARC = no SECTION III - PHYSICAL DATA COLOR: Clear amber to brown PHYSICAL FORM: Liquid ODOR: Petroleum NON-VOLATILE (weight): 98-100% pH: N.A. BOILING RANGE: N.E. MELTING RANGE: N.A. VAPOR DENSITY: N.E. VAPORIZATION RATE: N.E. VAPOR PRESSURE: N.E. DENSITY: 7.2-7.3 lb/gal (0.86-0.87 kg/l) SECTION IV - FIRE AND EXPLOSION DATA HMIS FLAMMABILITY RATING: 1 FLASH POINT: 395ºF (200ºC) FLAMMABLE LIMITS: LEL: N.E. UEL: N.E. EXTINGUISHING MEDIA: Carbon dioxide or other dry chemical fire fighting agents. UNUSUAL FIRE AND EXPLOSION HAZARDS: None. SPECIAL FIRE FIGHTING PROCEDURES: Firefighters should wear self-contained breathing apparatus. Cool tanks and container exposed to fire with water. SECTION V - HEALTH HAZARD DATA EMERGENCY AND FIRST AID PROCEDURES: Eye Contact: Flush eyes with large amounts of water. Consult a physician immediately. Skin Contact: Wash affected area with soap and water. If irritation persists, consult a physician. Inhalation: Remove to an uncontaminated area, administer oxygen if necessary. If victim has stopped breathing begin CPR. Get medical attention. Ingestion: If conscious, give water but do not induce vomiting. Get immediate medical attention. MEDICAL CONDITIONS PRONE TO AGGRAVATION BY EXPOSURE: None known PRIMARY ROUTES OF ENTRY: Inhalation, skin and eye contact. HEALTH HAZARDS (acute and chronic) / EFFECTS OF OVEREXPOSURE: 1. Repeated or prolonged skin contact with petroleum and related products tend to remove natural skin oils leading to irritation and dermatitis 2. Contact with eye tissues will cause irritation and possible damage unless first aid measures are taken. 3. Inhalation of product vapors is not expected at ambient temperatures because of the low vapor pressure of the product. Inhalation of particle mists or vapors from hot product may be harmful to the respiratory system. Minimize exposure to mists, fumes or vapors. 4. Ingestion of this product is expected to be harmful. Ingestion could result in aspiration into the lungs possibly leading to chemical pneumonia. SECTION VI - REACTIVITY DATA STABILITY: Stable HAZARDOUS POLYMERIZATION: Will not occur. HAZARDOUS DECOMPOSITION PRODUCTS: Oxides of carbon and nitrogen. INCOMPATIBILITY: Strong acids, alkalis and oxidizing agents. CONDITIONS TO AVOID: Contact with incompatible materials. SECTION VII - SPILL OR LEAK PROCEDURES STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Absorb on sweeping compound or other absorbent material. Keep petroleum out of streams and waterways. WASTE DISPOSAL: Incinerate or dispose of in accordance with existing Federal, State and Local environmental regulations. SECTION VIII - SAFE HANDLING AND USE INFORMATION RESPIRATORY PROTECTION: A NIOSH approved respirator to remove vapors or particle mists when necessary. PROTECTIVE GLOVES: Chemical resistant rubber or plastic. EYE PROTECTION: Safety goggles. OTHER PROTECTIVE EQUIPMENT: N.A. SECTION IX - SPECIAL PRECAUTIONS AND STORAGE A PRECAUTIONS TO BE TAKEN IN HANDLING: Avoid contact with skin and eyes. Avoid inhalation of vapors. PRECAUTIONS TO BE TAKEN IN STORING: Completely drain "Empty" drums, properly bung and promptly dispose in an environmentally safe manner and in accordance with governmental regulations. Recycle drums only through qualified reprocessing organizations. SECTION X - SHIPPING DATA DOT/IMDG/IATA SHIPPING NAME: N.A. UN/NA NUMBER: N.A. DOT/IMDG/IATA HAZARD CLASS.: N.A. T.S.C.A. STATUS: Listed DOT/IMDG/IATA REQUIRED LABELS: N.A. TECHNICAL SHIPPING NAME: N.A. PREPARED BY: Alla Furman, Sr. Corrosion Engineer APPROVED BY: Margarita Kharshan, Lab Director DATE PREPARED: 7/16/01 SUPERSEDES: None DISCLAIMER: This information is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of the Cortec Corporation. The data on this sheet relates only to the specific material designated herein. The Cortec Corporation assumes no legal responsibility for use or reliance upon this data. N.E. = NOT ESTABLISHED N.A. = NOT APPLICABLE |
|||||||||||||||
| [About Cortec] [What's New] [Publications] [Products] [Contact Us] [Related Links] [International] | |||||||||||||||