|
|
|||
|
||||
|
||||
|
MATERIAL SAFETY DATA SHEET THE CORTEC CORPORATION 4119 WHITE BEAR PARKWAY ST. PAUL, MINNESOTA 55110 PHONE: 651-429-1100 OR TOLL FREE 1-800-4-CORTEC FAX: 651-429-1122 EMERGENCY PHONE NO.: CHEMTREC (FOR SPILL, LEAK, FIRE, EXPOSURE OR ACCIDENT): 1-800-424-9300 (DAY OR NIGHT) * * * * * * * * * *VpCI™-609 S * * * * * * * * * * * * * SECTION I - PRODUCT IDENTIFICATION PRODUCT NAME: VpCI™-609 S PRODUCT DESCRIPTION: Proprietary corrosion inhibitor. SECTION II - HAZARDOUS INGREDIENTS
Carcinogenic: OSHA = no NTP = no IARC = no SECTION III - PHYSICAL DATA COLOR: White to off-white PHYSICAL FORM: Powder ODOR: Faint pH: 6.0-7.0 (1% aqueous) BOILING RANGE: N.E. VAPOR DENSITY: N.E. MELTING RANGE: 188º-203ºC DENSITY: N.A. VAPORIZATION RATE: N.A. VAPOR PRESSURE: N.E. NON-VOLATILE (weight): 96-100% SECTION IV - FIRE AND EXPLOSION DATA HMIS FLAMMABILITY RATING: 1 FLASH POINT: N.A. FLAMMABLE LIMITS: LEL: N.E. UEL: N.E. EXTINGUISHING MEDIA: Water, carbon dioxide or other dry chemical fire fighting agents. UNUSUAL FIRE AND EXPLOSION HAZARDS: Decomposition of this product will produce ammonia and carbon monoxide. SPECIAL FIRE FIGHTING PROCEDURES: Firefighters should wear self-contained breathing apparatus. SECTION V - HEALTH HAZARD DATA EMERGENCY AND FIRST AID PROCEDURES: Eye Contact: Flush eyes with water for at least 15 minutes. Consult a physician. Skin Contact: Wash affected area with soap and water. If irritation persists, consult a physician. Inhalation: Remove to an uncontaminated area, administer oxygen if necessary. If victim has stopped breathing begin CPR. Get medical attention. Ingestion: If conscious give water, do not induce vomiting. Get immediate medical attention. MEDICAL CONDITIONS PRONE TO AGGRAVATION BY EXPOSURE: Eye disease, allergies and skin disorders, respiratory disorders such as asthma or emphysema. PRIMARY ROUTES OF ENTRY: Inhalation HEALTH HAZARDS (acute and chronic) / EFFECTS OF OVEREXPOSURE: 1. Eye contact with this product may produce irritation and redness. 2. Repeated or prolonged contact with skin may produce mild irritation dryness or itching. 3. Inhalation of product vapors is not expected to pose a significant health hazard due to the low vapor pressure of the product. Excessive inhalation of dusts resulting from the use of this product may be harmful and should be avoided. 4. Ingestion of this product may be harmful. There are no specific data known to exist on the acute or chronic oral toxicity of the components in this product. However, this product is expected to have a low order of oral toxicity. SECTION VI - REACTIVITY DATA STABILITY: Stable HAZARDOUS POLYMERIZATION: Will not occur HAZARDOUS DECOMPOSITION PRODUCTS (Under fire conditions): Ammonia and carbon oxides. INCOMPATIBILITY: Alkalis/bases CONDITIONS TO AVOID: Heat and open flame. SECTION VII - SPILL OR LEAK PROCEDURES STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Sweep up. Avoid skin contact, pick up all free powder, when only residue remains. Flush area with copious quantities of water to remove traces of residues. WASTE DISPOSAL: Incinerate or dispose of in accordance with existing Federal, State and Local environmental regulations. SECTION VIII - SAFE HANDLING AND USE INFORMATION RESPIRATORY PROTECTION: A NIOSH approved dust/mist respirator is recommended if airborne dusts are created. PROTECTIVE GLOVES: Chemical resistant rubber of plastic. EYE PROTECTION: Safety goggles. OTHER PROTECTIVE EQUIPMENT: N.A. SECTION IX - SPECIAL PRECAUTIONS AND STORAGE DATA PRECAUTIONS TO BE TAKEN IN HANDLING: Avoid inhalation of dusts. PRECAUTIONS TO BE TAKEN IN STORING: Keep containers tightly closed and store in a cool dry place SECTION X - SHIPPING DATA DOT/IMDG/IATA SHIPPING NAME: N.A. U.N. / N.A. NUMBER: N.A. DOT/IMDG/IATA HAZARD CLASS.: N.A. T.S.C.A. STATUS: Listed DOT/IMDG/IATA REQUIRED LABELS: N.A. TECHNICAL SHIPPING NAME: N.A. FREIGHT CLASS BULK: Same as above LTL: 70 TL: 40 MW: 30 PREPARED BY: Margarita Kharshan, Laboratory Director APPROVED BY: Boris Miksic, President/CEO DATE PREPARED: 02/08/02 SUPERSEDES: 7/21/98 DISCLAIMER: This information is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of the Cortec Corporation. The data on this sheet relates only to the specific material designated herein. The Cortec Corporation assumes no legal responsibility for use or reliance upon this data. N.E. = NOT ESTABLISHED N.A. = NOT APPLICABLE |
||||||||||||
| [About Cortec] [What's New] [Publications] [Products] [Contact Us] [Related Links] [International] | |||||||||||||