* * * * * * * * * * * * * * * * VpCI™-705 * * * * * * * * * * * * * * * * * *

PRODUCT DESCRIPTION: A proprietary mixture of corrosion inhibitors and emulsifiers.

Carcinogenic: OSHA = no NTP = no IARC = no

COLOR: Clear yellow PHYSICAL FORM: Liquid

NON-VOLATILE (weight): 18-26% ODOR: Faint

pH: N.E. MELTING RANGE: N.A.

BOILING RANGE: N.E. VAPOR PRESSURE: N.E.

VAPOR DENSITY: N.E. EVAPORATION RATE: N.A.

DENSITY: 6.7-6.9 lb/gal (0.80-0.83 kg/l)

HMIS FLAMMABILITY RATING: 2

FLASH POINT: 156ºF (69ºC) (COC)

FLAMMABLE LIMITS: LEL: N.E. UEL: N.E.

EXTINGUISHING MEDIA: Carbon dioxide or other dry chemical fire fighting agents.

UNUSUAL FIRE AND EXPLOSION HAZARDS: None.

SPECIAL FIRE FIGHTING PROCEDURES: Firefighters should wear self-contained breathing apparatus.

EMERGENCY AND FIRST AID PROCEDURES:

Eye Contact: Flush eyes with water for at least 15 minutes. Consult a physician. Skin Contact: Wash affected area with soap and water. If irritation persists, consult a physician. Inhalation: Remove to an uncontaminated area, administer oxygen if necessary. Get medical attention. Ingestion: If swallowed do not induce vomiting. If victim has stopped breathing begin CPR. Get immediate medical attention.

MEDICAL CONDITIONS PRONE TO AGGRAVATION BY EXPOSURE: None known.

PRIMARY ROUTES OF ENTRY: Inhalation, skin contact, Eye contact.

HEALTH HAZARDS (acute and chronic) / EFFECTS OF OVEREXPOSURE:

1. Repeated or prolonged skin contact with petroleum and related products tend to remove natural skin oils leading to irritation and dermatitis.

2. Contact with eye tissues will cause irritation and possible damage unless prompt first aid measures are taken.

3. Inhalation of product vapors in not expected at ambient temperatures because of the low vapor pressure of the product. Inhalation of particle mists or vapors from hot product may be harmful to respiratory system. Exposure to mist, fumes or vapors (from hot product) should be minimized.

4. Ingestion of this product is expected to be harmful.

STABILITY: Stable

HAZARDOUS POLYMERIZATION: Will not occur

HAZARDOUS DECOMPOSITION PRODUCTS: Oxides of nitrogen and carbon.

INCOMPATIBILITY: Contact with Strong acids, alkalis and oxidizing agents.

CONDITIONS TO AVOID: Contact with strong acids, alkalis and oxidizing agents.

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Absorb on sweeping compound or other absorbent material. Keep petroleum out of streams and waterways. Advise authorities if product as entered or may enter sewers, waterways, or extensive land areas. WASTE DISPOSAL: Incinerate or dispose of in accordance with existing Federal, State and Local environmental regulations.

RESPIRATORY PROTECTION: A NIOSH approved respirator to remove vapors or particle mists when necessary. PROTECTIVE GLOVES: Chemical resistant rubber or plastic. EYE PROTECTION: Safety goggles.

OTHER PROTECTIVE EQUIPMENT: Not required.

SECTION IX - SPECIAL PRECAUTIONS AND STORAGE PRECAUTIONS TO BE TAKEN IN HANDLING: Avoid eye and skin contact. Avoid inhalation of particle mists.

PRECAUTIONS TO BE TAKEN IN STORING: Completely drain "Empty" drums, properly bung and promptly dispose in an environmentally safe manner and in accordance with governmental regulations. Recycle drums only through qualified reprocessing organizations.

DOT/IMDG/IATA SHIPPING NAME: Petroleum distillates, nos.

UN/NA NUMBER: 1268

DOT/IMDG/IATA HAZARD CLASS.: 3

T.S.C.A. STATUS: Listed

DOT/IATA REQUIRED LABELS: Flammable liquid

IMDG: Not regulated

TECHNICAL SHIPPING NAME: Petroleum distillates, nos.

PREPARED BY: Alla Furman, Senior Corrosion Engineer

APPROVED BY: Margarita Kharshan, Lab Director

DATE PREPARED: 11/12/02 SUPERSEDES: 9/18/00

DISCLAIMER: This information is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of Cortec Corporation. The data on this sheet relates only to the specific material designated herein. The Cortec Corporation assumes no legal responsibility for use or reliance upon this data.

N.E. = NOT ESTABLISHED N.A. = NOT APPLICABLE