|
|
|||
|
||||
|
||||
|
MATERIAL SAFETY DATA SHEET THE CORTEC CORPORATION 4119 WHITE BEAR PARKWAY ST. PAUL, MINNESOTA 55110 PHONE: 651-429-1100 OR TOLL FREE 1-800-4-CORTEC FAX: 651-429-1122 EMERGENCY PHONE NO.: CHEMTREC (FOR SPILL, LEAK, FIRE, EXPOSURE OR ACCIDENT): 1-800-424-9300 (DAY OR NIGHT) * * * * * * * * * * * * * * * VpCI™ CorrLube Grease* * * * * * * * * * * * SECTION I - PRODUCT IDENTIFICATION PRODUCT NAME: VpCI™ CorrLube Grease PRODUCT DESCRIPTION: Proprietary blend of corrosion inhibitors in lithium-based EP Grade 2 grease. SECTION II - HAZARDOUS INGREDIENTS
Carcinogenic: OSHA = no NTP = no IARC = no SECTION III - PHYSICAL DATA COLOR: Thick brown PHYSICAL FORM: Grease NON-VOLATILE (WEIGHT): N.E. ODOR: Slight Petroleum FREEZING POINT: N.E. BOILING RANGE: N.E. pH: N.E. MELTING RANGE: N.A. EVAPORATION RATE: N.E. VAPOR DENSITY: N.E. VAPOR PRESSURE: N.E. DENSITY: 7.3-7.6 lb/gal (0.87-0.91 kg/l) SECTION IV - FIRE AND EXPLOSION DATA HMIS FLAMMABILITY RATING: 1 FLASH POINT: >300ºF (>149ºC) (COC) FLAMMABLE LIMITS: LEL: N.E. UEL: N.E. EXTINGUISHING MEDIA: Carbon dioxide or other dry chemical fire fighting agents. UNUSUAL FIRE AND EXPLOSION HAZARDS: None SPECIAL FIRE FIGHTING PROCEDURES: Firefighters should wear self-contained breathing apparatus. SECTION V - HEALTH HAZARD DATA EMERGENCY AND FIRST AID PROCEDURES: Eye Contact: Flush eyes with large amounts of water. Consult physician immediately. Skin Contact: Wash affected area with soap and water. If irritation persists, consult a physician. Inhalation: Remove to uncontaminated area, administer oxygen if necessary. If victim has stopped breathing begin CPR. Get medical attention. Ingestion: If conscious, give water but do not induce vomiting. Get immediate medical attention. MEDICAL CONDITIONS PRONE TO AGGRAVATION BY EXPOSURE: None known. PRIMARY ROUTES OF ENTRY: Inhalation, skin and eye contact. HEALTH HAZARDS (acute and chronic) / EFFECTS OF OVEREXPOSURE: 1. Repeated or prolonged skin contact can cause moderate irritation and defatting of the skin possibly leading to dermatitis. 2. Contact with eye tissues will cause irritation and possible damage unless prompt first aid measures are taken. 3. Inhalation of product vapors is not expected at ambient temperatures because of the low vapor pressure of the product. Inhalation of particle mists or vapors from hot product may be harmful to the respiratory system. Minimize exposure to mists, fumes or vapors. 4. Product is harmful if swallowed. Ingestion of this product could result in aspiration into the lungs possibly leading to chemical pneumonia. SECTION VI REACTIVITY DATA STABILITY: Stable HAZARDOUS POLYMERIZATION: Will not occur. HAZARDOUS DECOMPOSITION PRODUCTS: Oxides of carbon, nitrogen and sulfur. INCOMPATIBILITY: Strong acids, Alkalis and oxidizing agents. CONDITIONS TO AVOID: Contact with incompatible materials. SECTION VII - SPILL OR LEAK PROCEDURES STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Recover free product. Add sand, earth, or other suitable absorbent to spill area. Keep out of streams and waterways. WASTE DISPOSAL: Dispose of in accordance with existing Federal, State and Local environmental regulations. SECTION VIII - SAFE HANDLING AND USE INFORMATION RESPIRATORY PROTECTION: A NIOSH approved respirator to remove vapors or particle mists when necessary. PROTECTIVE GLOVES: Chemical resistant rubber or plastic. EYE PROTECTION: Safety goggles. OTHER PROTECTIVE EQUIPMENT: Eye wash station SECTION IX - SPECIAL PRECAUTIONS AND STORAGE PRECAUTIONS TO BE TAKEN IN HANDLING: Avoid eye and skin contact. Avoid excessive inhalation of product vapors. PRECAUTIONS TO TAKEN IN STORING: Completely drain "Empty" drums , properly bung and promptly dispose in an environmentally safe manner and in accordance with governmental regulations. Recycle drums only through qualified reprocessing organizations. SECTION X - SHIPPING DATA DOT/IMDG/IATA SHIPPING NAME: N.A. U.N. / N.A. NUMBER: N.A. DOT/IMDG/IATA HAZARD CLASS.: N.A. T.S.C.A. STATUS: Listed DOT/IMDG/IATA REQUIRED LABELS: N.A. TECHNICAL SHIPPING NAME: N.A. FREIGHT CLASS BULK: Same as above LTL: 65 TL: 35 MW: 30 PREPARED BY: Margarita Kharshan, Laboratory Director APPROVED BY: Boris Miksic, President/CEO DATE PREPARED: 10/01/01 SUPERSEDES: 4/8/99 DISCLAIMER: This information is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of the Cortec Corporation. The data on this sheet relates only to the specific material designated herein. The Cortec Corporation assumes no legal responsibility for use or reliance upon this data. N.E. = NOT ESTABLISHED N.A. = NOT APPLICABLE |
|||||||||||||||
| [About Cortec] [What's New] [Publications] [Products] [Contact Us] [Related Links] [International] | ||||||||||||||||