PRODUCT DESCRIPTION: Proprietary water-based corrosion inhibitor coating.

Carcinogenic: OSHA = no NTP = no IARC = no

COLOR: Brown PHYSICAL FORM: Viscous liquid

NON-VOLATILE (weight): 10-20% ODOR: Mild

FREEZING POINT: N.E.

BOILING RANGE: >212ºF (100ºC) pH: 11.5-13.0 (Neat)

MELTING RANGE: N.A.

EVAPORATION RATE: N.E. VAPOR DENSITY: N.E.

VAPOR PRESSURE: N.E.

DENSITY: 8.2-8.4 lb/gal (0.98-1.01 kg/l)

HMIS FLAMMABILITY RATING: 0

FLASH POINT: >200ºF (93ºC)

FLAMMABLE LIMITS: LEL: N.E. UEL: N.E.

EXTINGUISHING MEDIA: Water, carbon dioxide, foam or other dry chemical fire fighting agents.

UNUSUAL FIRE AND EXPLOSION HAZARDS: None

SPECIAL FIRE FIGHTING PROCEDURES: Firefighters should wear self-contained breathing apparatus.

EMERGENCY AND FIRST AID PROCEDURES:

Eye Contact: Flush eyes with large amounts of water. Consult a physician immediately. Skin Contact: Wash affected area with soap and water. If irritation persists, consult a physician. Inhalation: Remove to an uncontaminated area, administer oxygen if necessary. If victim has stopped breathing begin CPR. Get medical attention. Ingestion: If conscious, give water but do not induce vomiting. Get immediate medical attention.

MEDICAL CONDITIONS PRONE TO AGGRAVATION BY

EXPOSURE: None known.

PRIMARY ROUTES OF ENTRY: Inhalation, skin and eye contact.

HEALTH HAZARDS (acute and chronic) / EFFECTS OF OVEREXPOSURE:

STABILITY: Stable

HAZARDOUS POLYMERIZATION: Will not occur.

HAZARDOUS DECOMPOSITION PRODUCTS (under fire conditions): Oxides of carbon, nitrogen and sulfur.

INCOMPATIBILITY: Strong oxidizing agents, alkalis/bases.

CONDITIONS TO AVOID: Contact with incompatible materials.

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Absorb on sweeping compound or other absorbent material. Place in closed container for disposal.

WASTE DISPOSAL: Incinerate or dispose of in accordance with existing Federal, State and Local environmental regulations.

RESPIRATORY PROTECTION: A NIOSH/OSHA approved respirator for product vapors when used in confined areas. If product is sprayed, use a combination vapor-dust/mist or a dust/mist respirator.

PROTECTIVE GLOVES: Chemical resistant rubber or plastic.

EYE PROTECTION: Chemical splash goggles.

OTHER PROTECTIVE EQUIPMENT: Eye wash station.

PRECAUTIONS TO BE TAKEN IN HANDLING: Avoid eye and skin contact. Avoid inhalation of particle mists.

PRECAUTIONS TO BE TAKEN IN STORING: Completely drain "Empty" drums , properly bung and promptly dispose in an environmentally safe manner and in accordance with governmental regulations. Recycle drums only through qualified reprocessing organizations.

DOT/IMDG/IATA SHIPPING NAME: N.A.

UN/NA NUMBER: N.A.

DOT/IMDG/IATA HAZARD CLASS.: N.A.

T.S.C.A. STATUS: Listed

DOT/IDMG/IATA REQUIRED LABELS: N.A.

TECHNICAL SHIPPING NAME: N.A.

PREPARED BY: Julie Noreen, Technical Service Engineer

APPROVED BY: Margarita Kharshan, Lab Director

DATE PREPARED: 4/10/02 SUPERSEDES: 4/10/01

DISCLAIMER: This information is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of the Cortec Corporation. The data on this sheet relates only to the specific material designated herein. The Cortec Corporation assumes no legal responsibility for use or reliance upon this data.

N.E. = NOT ESTABLISHED N.A. = NOT APPLICABLE