|
|
|||
|
||||
|
||||
|
MATERIAL SAFETY DATA SHEET THE CORTEC CORPORATION 4119 WHITE BEAR PARKWAY ST. PAUL, MINNESOTA 55110 PHONE: 651-429-1100 OR TOLL FREE 1-800-4-CORTEC FAX: 651-429-1122 EMERGENCY PHONE NO.: CHEMTREC (FOR SPILL, LEAK, FIRE, EXPOSURE OR ACCIDENT): 1-800-424-9300 (DAY OR NIGHT) * * * * * * * * * Eco-Corr® Biodegradable Film * * * * * * * * * * * * SECTION I - PRODUCT IDENTIFICATION PRODUCT NAME: Eco-Corr® Biodegradable FilmPRODUCT DESCRIPTION: Biodegradable film containing a proprietary corrosion inhibitor. SECTION II - HAZARDOUS INGREDIENTS
Carcinogenic: OSHA = no NTP = no IARC = no SECTION III - PHYSICAL DATA COLOR: Clear FORM: Film pH: N.A. ODOR: Odorless NON-VOLATILE (weight): 99-100% BOILING RANGE: N.E. VAPOR DENSITY: N.E. MELTING RANGE: 212-248ºF (100-120ºC) EVAPORATION RATE: N.A. VAPOR PRESSURE: N.E. DENSITY: N.A. SECTION IV - FIRE AND EXPLOSION DATA HMIS FLAMMABILITY RATING: 0 FLASH POINT: N.E. FLAMMABLE LIMITS: LEL: N.E. UEL: N.E. EXTINGUISHING MEDIA: Water, carbon dioxide or other dry chemical fire fighting agents. UNUSUAL FIRE AND EXPLOSION HAZARDS: None SPECIAL FIRE FIGHTING PROCEDURES: Firefighters should wear self-contained breathing apparatus. SECTION V - HEALTH HAZARD DATA EMERGENCY AND FIRST AID PROCEDURES: Skin Contact: Wash affected area with soap and water. If irritation or rash persists, consult a physician. MEDICAL CONDITIONS PRONE TO AGGRAVATION BY EXPOSURE: None known PRIMARY ROUTES OF ENTRY: Skin contact HEALTH HAZARDS (acute and chronic) / EFFECTS OF OVEREXPOSURE: 1. Repeated or prolonged contact with skin may produce slight irritation. 2. Inhalation of product vapors is not considered a significant hazard due to the low vapor pressure of the product. SECTION VI - REACTIVITY DATA STABILITY: Stable HAZARDOUS POLYMERIZATION: Will not occur HAZARDOUS DECOMPOSITION PRODUCTS (under fire conditions): Oxides of carbon and nitrogen. INCOMPATIBILITY: Strong acids, alkalis and reducing agents. CONDITIONS TO AVOID: Avoid contact with incompatible materials. SECTION VII - SPILL OR LEAK PROCEDURES STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Dispose with trash. WASTE DISPOSAL: Dispose of in accordance with existing Federal, State and Local environmental regulations. SECTION VIII - SAFE HANDLING AND USE INFORMATION RESPIRATORY PROTECTION: Not required. PROTECTIVE GLOVES: Chemical resistant rubber or plastic for prolonged contact. EYE PROTECTION: Not required. OTHER PROTECTIVE EQUIPMENT: Not required. SECTION IX - SPECIAL PRECAUTIONS AND STORAGE DATA PRECAUTIONS TO BE TAKEN IN HANDLING: Workers should wash hands thoroughly with soap and water prior to eating, drinking, smoking or using lavatory. PRECAUTIONS TO TAKEN IN STORING: Keep containers tightly closed. Store in a cool dry place. Keep away from sources of flame. SECTION X - SHIPPING DATA DOT/IMDG/IATA SHIPPING NAME: N.A. UN/NA NUMBER: N.A. DOT/IMDG/IATA HAZARD CLASS.: N.A. T.S.C.A. STATUS: Listed DOT/IMDG/IATA REQUIRED LABELS: N.A. TECHNICAL SHIPPING NAME: N.A. PREPARED BY: Bob Berg, Technical Service Engineer APPROVED BY: Margarita Kharshan, Lab Director DATE PREPARED: 6/7/02 SUPERSEDES: 4/10/01 DISCLAIMER: This information is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of the Cortec Corporation. The data on this sheet relates only to the specific material designated herein. The Cortec Corporation assumes no legal responsibility for use or reliance upon this data. N.E. = NOT ESTABLISHED N.A. = NOT APPLICABLE |
||||||||||||
| [About Cortec] [What's New] [Publications] [Products] [Contact Us] [Related Links] [International] | |||||||||||||