MATERIAL SAFETY DATA SHEET
THE CORTEC CORPORATION
4119 WHITE BEAR PARKWAY
ST. PAUL, MINNESOTA 55110
PHONE: 651-429-1100 OR TOLL FREE 1-800-4-CORTEC
EMERGENCY PHONE NO.: CHEMTREC (FOR SPILL, LEAK, FIRE, EXPOSURE OR ACCIDENT): 1-800-424-9300 (DAY OR NIGHT)
* * * * * * * * * * * * * * * * * S-10 F* * * * * * * * * * * * * * * *
SECTION I - PRODUCT IDENTIFICATION
PRODUCT NAME: S-10 F
PRODUCT DESCRIPTION: A proprietary mixture of corrosion inhibitors.
SECTION II - HAZARDOUS INGREDIENTS
Carcinogenic: OSHA = no NTP = no IARC = no
SECTION III - PHYSICAL DATA
COLOR: Slightly hazy PHYSICAL FORM: Liquid
NON-VOLATILE (weight): 25-35%
VAPOR DENSITY: N.E. pH: 7-8 (Neat)
VAPOR PRESSURE: N.E. BOILING RANGE: N.E.
MELTING RANGE: N.A. ODOR: N.A.
DENSITY: 8.5-8.7 lb/gal (1.02-1.04 kg/l)
EVAPORATION RATE: Same as water
SECTION IV - FIRE AND EXPLOSION DATA
HMIS FLAMMABILITY RATING: 1
FLASH POINT: None
FLAMMABLE LIMITS: LEL: N.E. UEL: N.E.
EXTINGUISHING MEDIA: Water, carbon dioxide or other dry chemical fire fighting agents.
UNUSUAL FIRE AND EXPLOSION HAZARDS: None
SPECIAL FIRE FIGHTING PROCEDURES: Firefighters should wear-self contained breathing apparatus.
SECTION V - HEALTH HAZARD DATA
EMERGENCY AND FIRST AID PROCEDURES:
Eye Contact: Flush eyes with water for at least 15 minutes. Consult a physician. Skin Contact: Wash affected area with soap and water. If irritation persists, consult a physician. Inhalation: Remove to an uncontaminated area, administer oxygen if necessary. Get medical attention. Ingestion: If victim is conscious, give milk or water and induce vomiting. If victim has stopped breathing begin CPR. Get immediate medical attention.
MEDICAL CONDITIONS PRONE TO AGGRAVATION BY
EXPOSURE: None known.
PRIMARY ROUTES OF ENTRY: Inhalation, skin contact, eye contact.
HEALTH HAZARDS (acute and chronic) / EFFECTS OF OVEREXPOSURE:
1. Eye contact with this product may be irritating.
2. Repeated or prolonged skin contact with this product may product mild, reversible skin irritation.
3. Inhalation of product vapors and/or particle mists resulting from the use of this product may be harmful.
4. Ingestion of this product may be harmful.
SECTION VI - REACTIVITY DATA
HAZARDOUS POLYMERIZATION: Will not occur
HAZARDOUS DECOMPOSITION PRODUCTS: Oxides of nitrogen and carbon.
INCOMPATIBILITY: Strong acids, alkalis and oxidizing agents
CONDITIONS TO AVOID: Contact with incompatible materials
SECTION VII - SPILL OR LEAK PROCEDURES
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Absorb on sweeping compound or other absorbent material. WASTE DISPOSAL: Incinerate or dispose of in accordance with existing Federal, State and Local environmental regulations.
SECTION VIII - SAFE HANDLING AND USE INFORMATION
RESPIRATORY PROTECTION: A NIOSH approved dust/mist respirator is recommended if particle mists are generated.
PROTECTIVE GLOVES: Chemical resistant rubber or plastic.
EYE PROTECTION: Safety goggles.
OTHER PROTECTIVE EQUIPMENT: Not required.
SECTION IX - SPECIAL PRECAUTIONS AND STORAGE DATA
PRECAUTIONS TO BE TAKEN IN HANDLING: Avoid eye and repeated skin contact.
PRECAUTIONS TO BE TAKEN IN STORING: Keep containers tightly closed.
SECTION X - SHIPPING DATA
DOT/IMDG/IATA SHIPPING NAME: N.A.
UN/NA NUMBER: N.A.
DOT/IMDG/IATA HAZARD CLASS.: N.A.
T.S.C.A. STATUS: Listed
DOT/IMDG/IATA REQUIRED LABELS: N.A.
TECHNICAL SHIPPING NAME: N.A.
PREPARED BY: Alla Furman, Sr. Corrosion Engineer
APPROVED BY: Margarita Kharshan, Lab Director
DATE PREPARED: 3/12/02 SUPERSEDES: 9/7/00
DISCLAIMER: This information is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of the Cortec Corporation. The data on this sheet relates only to the specific material designated herein. The Cortec Corporation assumes no legal responsibility for use or reliance upon this data.
N.E. = NOT ESTABLISHED N.A. = NOT APPLICABLE
|[About Cortec] [What's New] [Publications] [Products] [Contact Us] [Related Links] [International]|