For home, boat,
auto - anywhere you have rust, our new VCI CorrVerter
will help you. This water-based primer is recommended for application
to rusty or poorly prepared steel surfaces where further corrosion
protection is required. VCI CorrVerter
is formulated to penetrate and eliminate rust, get down to the bare
metal and stop further rusting. VCI CorrVerter
contains a novel chemical chelating agent that modifies the surface
rust into a hydrophobic passive layer. VCI CorrVerter
combines this chelating agent with a high solids waterborne latex
that has extremely low water vapor permeability.VCI CorrVerter
contains no tannic, phosphoric or any other acids, provides long-term
corrosion protection for poorly prepared substrates, and can be
topcoated with solvent-based and water-based paints with no bleeding.
Cortecõs VCI-386 (acrylic-based latex), VCI-395 and VCI-365 (epoxies),
and VCI-396 (moisture cure urethane) will be the best choices for
topcoats. This unique product works even in the presence of excess
salt contamination, which makes it very suitable for marine application.
Do you have problems with sandblasting or cleaning? Use VCI CorrVerter.
It will arrest rust, promote topcoat adhesion and prevent rerusting.
And, like the majority of Cortec's products, VCI CorrVerter
is environmentally friendly, non-flammable and non-toxic.