Cor-Pak Bubbles

MATERIAL SAFETY DATA SHEET
THE CORTEC CORPORATION
4119 WHITE BEAR PARKWAY
ST. PAUL, MINNESOTA 55110
PHONE: 651-429-1100 OR TOLL FREE 1-800-4-CORTEC
FAX: 651-429-1122

EMERGENCY PHONE NO.: CHEMTREC (FOR SPILL, LEAK, FIRE, EXPOSURE OR ACCIDENT): 1-800-424-9300 (DAY OR NIGHT)

* * * * * * * * * * * Cor-Pak® VpCI™ Bubbles * * * * * * * * * *

SECTION I - PRODUCT IDENTIFICATION

PRODUCT NAME: Cor-Pak® VpCI™ Bubbles

PRODUCT DESCRIPTION: Polyethylene bubble film containing a proprietary corrosion inhibitor.

SECTION II - HAZARDOUS INGREDIENTS

INGREDIENT NAME(S)	WEIGHT PERCENT	OCCUPATIONAL EXPOSURE LIMITS
		TLV OR PEL	ORAL LD-50
N.A.

Carcinogenic: OSHA = no NTP = no IARC = no

SECTION III - PHYSICAL DATA

PHYSICAL FORM: Bubbled film COLOR: Blue

NON-VOLATILE (weight): N.A. SPECIFIC GRAVITY: N.A.

VAPOR DENSITY: N.E. pH: N.A.

ODOR: None BOILING RANGE: N.E.

MELTING RANGE: N.A. EVAPORATION RATE: N.A.

DENSITY: N.A. VAPOR PRESSURE: N.A.

SECTION IV - FIRE AND EXPLOSION DATA

HMIS FLAMMABILITY RATING: 0

FLASH POINT: N.A.

FLAMMABLE LIMITS: LEL: N.A. UEL: N.A.

EXTINGUISHING MEDIA: Water, carbon dioxide or other dry chemical fire fighting agents.

UNUSUAL FIRE AND EXPLOSION HAZARDS: None.

SPECIAL FIRE FIGHTING PROCEDURES: Firefighters should wear self-contained breathing apparatus.

SECTION V - HEALTH HAZARD DATA

EMERGENCY AND FIRST AID PROCEDURES:

Skin Contact: Wash affected area with soap and water. If irritation persists, consult a physician.

MEDICAL CONDITIONS PRONE TO AGGRAVATION BY EXPOSURE: None known.

PRIMARY ROUTES OF ENTRY: Eye contact.

HEALTH HAZARDS (acute and chronic) / EFFECTS OF OVEREXPOSURE:

1.  Eye contact with the film may cause mild irritation.
2.  Repeated or prolonged contact with skin may produce mild irritation.
3.  Inhalation or product vapors in not considered a significant hazard due to the low vapor pressure of the product.

SECTION VI - REACTIVITY DATA

STABILITY: Stable

HAZARDOUS POLYMERIZATION: Will not occur

HAZARDOUS DECOMPOSITION PRODUCTS: Oxides of nitrogen and carbon.

INCOMPATIBILITY: Contact with strong acids, alkalis and reducing agents.

CONDITIONS TO AVOID: Contact with incompatible materials.

SECTION VII - SPILL OR LEAK PROCEDURES

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Dispose with trash.

WASTE DISPOSAL: Dispose of in accordance with existing Federal, State and Local environmental regulations.

SECTION VIII - SAFE HANDLING AND USE INFORMATION

RESPIRATORY PROTECTION: Not required.

PROTECTIVE GLOVES: Impervious gloves for repeated or prolonged contact.

EYE PROTECTION: Not required.

OTHER PROTECTIVE EQUIPMENT: None

SECTION IX - SPECIAL PRECAUTIONS AND STORAGE DATA

PRECAUTIONS TO BE TAKEN IN HANDLING: Avoid eye contact. Workers should wash hands thoroughly with soap and water prior to eating, smoking, drinking or using lavatory.

PRECAUTIONS TO TAKEN IN STORING: Avoid contact with foodstuffs

SECTION X - SHIPPING DATA

DOT/IMDG/IATA SHIPPING NAME: N.A.

UN/NA NUMBER: N.A.

DOT/IMDG/IATA HAZARD CLASS.: N.A.

T.S.C.A. STATUS: Listed

DOT/IMDG/IATA REQUIRED LABELS: N.A.

TECHNICAL SHIPPING NAME: N.A.

PREPARED BY: Alex Sobkin, Pkg. Development Specialist

APPROVED BY: Margarita Kharshan, Lab Director

DATE PREPARED: 3/27/02 SUPERSEDES: 8/22/00

DISCLAIMER: This information is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge The Cortec Corporation. The data on this sheet relates only to the specific material designated herein. The Cortec Corporation assumes no legal responsibility for use or reliance upon these data.

N.E. = NOT ESTABLISHED N.A. = NOT APPLICABLE