Compatibility of Cortec Additives with Mobil DTE PM Series Oil
Background/
Purpose: Determine which Cortec additive will provide the best corrosion protection when mixed with Mobil DTE PM Series oil.
Materials: M-238
M-529
Mobil DTE PM Series Oil
Method: Standardized Compatibility Test
Procedure: The following samples were created:
The following procedure was followed:
-
- The samples were mixed and observed
- Compatibility is rated as a homogenous mixture with no gelling, precipitates, adverse reactions, or other deleterious affects
- The sample is listed as ok if considered compatible.
- The samples are cycled, 8 hours at 0° C and 16 hours 50° C, and observed at the different intervals. This is considered one cycle and the test is three cycles in duration.
- The samples were mixed and observed
Results: The following results were found:
Conclusion: M-238 and M-529 are fully compatible with Mobil DTE PM Series oil.
Project #: 02-216-1325
Estimated Cost of Project: 3.0 hours
To: Tim Rayburn, Alpine Summit Enterprises
From: Brian L. Wuertz
Date: 09-23-2002
cc: Boris Miksic
Anna Vignetti
Art Ahlbrecht
Rita Kharshan
Ashish Gandhi
Vanessa Schultz