PRESS RELEASE: Reduce Friction and Pollution in the Transportation Industry with EcoLine® Biobased Greases

Reduce Friction and Pollution in the Transportation Industry with EcoLine® Biobased Greases July 7, 2021 Trucks and trains are integral to the transportation and shipping industry. Furthermore, lubrication of high-pressure metal-to-metal components is essential to efficient and prolonged equipment service life. This routine maintenance task has traditionally been done [...]

By |2021-07-07T05:45:39-05:00July 7th, 2021|Press/Product Release|Comments Off on PRESS RELEASE: Reduce Friction and Pollution in the Transportation Industry with EcoLine® Biobased Greases

PRESS RELEASE: Achieving Sustainability by Utilizing Migratory Corrosion Inhibitor Technology

Achieving Sustainability by Utilizing Migratory Corrosion Inhibitor Technology July 5, 2021 According to certain engineering regulations, the durability and design of structural lifetime is often around 50 years. It can be greatly extended with regular maintenance; otherwise the structure should be demolished and rebuilt. By using MCI® Technology in [...]

By |2021-07-05T09:09:10-05:00July 5th, 2021|Press/Product Release|Comments Off on PRESS RELEASE: Achieving Sustainability by Utilizing Migratory Corrosion Inhibitor Technology

CASE HISTORY SPOTLIGHT: Case History #504: High-Temp Coating for Oil Cooler Corrosion

Case History #504: High-Temp Coating for Oil Cooler Corrosion June 29, 2021 A heavy equipment producer found corrosion inside carbon steel oil coolers during a six-month preventative maintenance check. The cooler manufacturer was able to reduce corrosion by switching to stainless steel but found that this significantly increased manufacturing [...]

By |2021-06-29T13:25:35-05:00June 29th, 2021|Case History Spotlight, Press/Product Release|Comments Off on CASE HISTORY SPOTLIGHT: Case History #504: High-Temp Coating for Oil Cooler Corrosion

PRESS RELEASE: A High Performance DTM Coating without the Hassle of 2K Primer/Topcoat Systems

A High Performance DTM Coating without the Hassle of 2K Primer/Topcoat Systems June 28, 2021 When choosing a protective coating for metal surfaces, many factors come into play. One of the first requirements is to ensure good adhesion with a direct to metal (DTM) primer. Sometimes, though, workers do [...]

By |2021-06-28T11:45:54-05:00June 28th, 2021|Press/Product Release|Comments Off on PRESS RELEASE: A High Performance DTM Coating without the Hassle of 2K Primer/Topcoat Systems

NEWS ALERT: Get the Right DFT for Optimal Coatings Results

Get the Right DFT for Optimal Coatings Results June 28, 2021 Getting the right DFT (dry film thickness) on a coating application is an important part of successful corrosion mitigation. If your DFT is too thin, it may not provide enough protection. If it is too thick, you will [...]

By |2021-06-28T11:32:24-05:00June 28th, 2021|Press/Product Release|Comments Off on NEWS ALERT: Get the Right DFT for Optimal Coatings Results

Corrosorber: An Economical Way to Absorb Corrosive Gases Before They Attack

Corrosorber®: An Economical Way to Absorb Corrosive Gases Before They Attack June 22, 2021 Hydrogen sulfide (H2S), volatile mercaptans, and other corrosive gases can lead to early failure on instrumentation and electricals in a variety of industries. One important means of protection is to capture these excess gases before [...]

By |2024-10-30T04:13:27-05:00June 22nd, 2021|Press/Product Release|Comments Off on Corrosorber: An Economical Way to Absorb Corrosive Gases Before They Attack

Cortec’s Top-Three Primer/Topcoat Combos for Micro-Corrosion Inhibiting Protection

Cortec’s Top-Three Primer/Topcoat Combos for Micro-Corrosion Inhibiting Protection June 21, 2021 Whenever time and resources allow, painters typically achieve the best coatings results from applying both a primer and a topcoat. Once this route has been chosen, the next important step is to select the best primer/topcoat combination for [...]

By |2021-06-21T12:11:53-05:00June 21st, 2021|Press/Product Release|Comments Off on Cortec’s Top-Three Primer/Topcoat Combos for Micro-Corrosion Inhibiting Protection

Cortec® Releases New Molybdate-Free Version of Revolutionary Cooling Water Treatment!

Cortec® Releases New Molybdate-Free Version of Revolutionary Cooling Water Treatment! June 17, 2021 For years, Cortec® Corporation has revolutionized the water treatment industry by providing effective, easy to use treatments to prevent corrosion during layup of boilers, cooling towers, and closed loop systems. As restrictions on the use and [...]

By |2021-06-17T03:19:26-05:00June 17th, 2021|Press/Product Release|Comments Off on Cortec® Releases New Molybdate-Free Version of Revolutionary Cooling Water Treatment!

A Quick-Dry Micro-Corrosion Inhibiting Coatings™ Solution for Fast-Paced Metals Manufacturing

A Quick-Dry Micro-Corrosion Inhibiting Coatings™ Solution for Fast-Paced Metals Manufacturing June 15, 2021 There are many factors to consider in the fast-paced metals manufacturing environment. One critical question is how to apply a protective coating quickly and effectively without having parts stick together farther down the line. Cortec® answers [...]

By |2021-06-15T03:37:43-05:00June 15th, 2021|Press/Product Release|Comments Off on A Quick-Dry Micro-Corrosion Inhibiting Coatings™ Solution for Fast-Paced Metals Manufacturing
Go to Top