CASE HISTORY SPOTLIGHT: Case History #56: Steel Coil Protection   May 05, 2023 A sheet steel company shipping its products around the world was having significant corrosion problems from condensation and salt air on steel coils passing through the tropics. They needed a packaging solution that met their protection and [...]

CASE HISTORY SPOTLIGHT: Case History #630: Krk Bridge Preservation Project  April 20, 2023 The Krk Bridge, which includes one of the world’s longest reinforced concrete arches, is located in a corrosive environment where strong winds blow salt spray onto the bridge’s surface. Almost four decades of chloride exposure led to corrosion [...]

CASE HISTORY SPOTLIGHT: Case History #706: Smart Stacking of Four Oil and Gas Rigs April 12, 2023 A global oil and gas service provider needed to preserve four tender rigs. Normally, they would use cold stacking, but this time, they needed a preservation method that would allow speedy reactivation. [...]

CASE HISTORY SPOTLIGHT: Case History #473: Adding MCI®-2005 to Dubai’s First Children’s Hospital   April 05, 2023 The first children’s hospital in Dubai was built with a footprint of 55,000 m² (592,015 ft²). An aggressive environment with high salinity, high humidity levels, high temperatures, and a high water table [...]

CASE HISTORY SPOTLIGHT: Case History #103: Fighting Electronics Corrosion at Wastewater Treatment Plant March 30, 2023 High humidity and hydrogen sulfide in deep tunnel pumping stations were causing corrosion that led to electronics and electrical failures, excessive downtime, and extra costs. The water reclamation district addressed the problem with [...]

CASE HISTORY SPOTLIGHT: Case History #604: Valve Hydrotesting and Storage   March 16, 2023 A leading international manufacturer of pressure and flow control components for the oil and gas industry needed a hydrotest additive and corrosion inhibiting coating for valves. They decided to try VpCI®-649 BD for multi-metal protection [...]

CASE HISTORY SPOTLIGHT: Case History #640: Restoring and Preserving Rusty Car Rims March 9, 2023 A vehicle maintenance workshop in Europe was in the business of restoring car rims. They needed a way to deal with existing rust and protect against further rust long-term. Their solution was to remove [...]

CASE HISTORY SPOTLIGHT: Case History #689: Standardizing VpCI®-649 for Hydrotesting   March 01, 2023 Years ago, a manufacturer of oil and gas “Christmas trees” and other equipment was using different Cortec® hydrotesting corrosion inhibitors at various locations around the world. They decided to streamline their product selection by standardizing [...]

CASE HISTORY SPOTLIGHT #506: VCI Paper for SUV Frame Preservation   February 21, 2023 SUV frames wrapped in VCI films were being rejected due to dark tarnish and corrosion spots where process oils had broken through the packaging. Since the customer could not eliminate the processing oil, another packaging solution [...]

CASE HISTORY SPOTLIGHT: Case History #644: Oil Company Part Preservation   February 14, 2023 A major international oil company needed cleaning, preservation, and storage of spares at a warehouse in Qatar. The climate was harsh, with high fluctuating temperatures, 90% humidity, and fine blowing sand. Pipes, flanges, valves, fittings, [...]