VpCI®’s for Basic Metals Industries2018-11-14T15:27:48+00:00

VpCI®'s for Basic Metals Industries

 

Click on the links below to access product descriptions and other information regarding various VpCI® (Vapor Phase Corrosion Inhibitor)/MCI® (Migrating Corrosion Inhibitor™) product lines.

Description: Multi-layer film. Designed for maximum strength and holding force with superior corrosion protection. Conforms exceptionally will to the curvature of the product with extra tear resistance. Developed particularly for low cost procedure to wrap metal coils in rolling position with eye horizontal.
Protection:Varies
Package:Standard and custom sizes
View Product Data Sheet

View Safety Data Sheet

Description: Transparent film that holds protected parts securely in place. Will not leave residue on parts. Multimetal protection. Available in machine and handwrap grades.Recyclable.
Protection:Varies
Package:Standard and Custom sizes
View Product Data Sheet

USDA-FDA

View Safety Data Sheet

View SGS Report/RoHS Compliance Documents

Description:
CorrBarrier is a water-based coating which exhibits excellent properties over various substrates. Primarily designed for the automotive under-body/under-hood market, it also has application in industrial maintenance, railcar, truck/trailer, and heavy machinery.Designed as a clear primer, CorrBarrier has excellent chip resistance while maintaining a fast dry time.This coating is heavy metal free, has good early water resistance, excellent salt fog resistance and very low VOC content.
Application:
CorrBarrier may be applied by brush, spray, or dip. A film thickness of at least 4-5 wet mils (100-125 microns) is recommended for uncovered outdoor storage.
View Product Data Sheet

View Safety Data Sheet

Description:
CorrVerter is a water-based primer recommended for application to rusty or poorly prepared steel surfaces where further corrosion protection is required and good surface preparation is difficult to achieve. CorrVerter is formulated to penetrate rust, eliminate rust, penetrate to the bare metal, and stop further rusting.CorrVerter contains a novel chemical chelating agent that modifies the surface rust into a hydrophobic passive layer. CorrVerter combines the above mentioned chelating agent with a high solids waterborne latex with extremely low water vapor permeability. The combination of the active chelating agent with a film-forming latex, thickeners and dispersant offers a unique formulation for a primer with excellent protection against re-rusting.CorrVerter does not contain tannic or phosphoric acids, provides long-term corrosion protection for poorly prepared substrates, and can be topcoated with solvent-based and water-based paints with no bleeding. For outdoor applications VpCI-386 or VpCI-387 can be utilized. For indoor applications, VpCI-396 may also be used.The combination of CorrVerter and VpCI-396 provides the best immersion coating for submersion in water, salt water, hydro carbons and high salinity water.
Application: Outdoor storage, aircraft, elevators, storage tanks, vehicles, pumps, cargo holds, marine equipment.
Package:
CorrVerter is available in 5 gallon (19 liter) plastic containers. Keep product from freezing. The shelf life of the coating is one year.
View Product Data Sheet

View Safety Data Sheet

Description: CorShield® is a multiple-layered protective fabric with a non-woven, soft inside layer. CorShield® is made from low-density polyethylene tapes, a high-density coating and is extrusion laminated.
Protection:Outdoor
Package:Standard and custom sizes
View Product Data Sheet

USDA-FDA

View Safety Data Sheet

Description: CorShield VpCI-146 Creped Paper is the premium corrosion inhibiting paper in the industry. Our patented Vapor phase Corrosion Inhibiting (VpCI) technology has revolutionized the way metals are protected in an enclosed package. CorShield Creped Paper provides superior corrosion protection for multiple metals, both ferrous and non-ferrous. CorShield Creped Paper also offers cushioning effect to physically protect delicate parts.
Application: CorShield Creped Paper can be used to protect products for storage and shipment in a variety of ways: single item packaging, interleaving, end closures for shipping tubes, insert strips for recessed areas in large packages, and as sheet liners or separators between products.
Package:Standard sizes: 48” x 56” sheets (1.22m x 1.42m) Custom sizes and constructions available upon request
View Product Data Sheet

View Safety Data Sheet

Description: Woven polyethylene film. Strong puncture and tear resistance for packaging large/heavy machinery. Provides multimetal protection, non-toxic, recyclable, transparent.
Protection:Varies
Package:Custom sizes.
View Product Data Sheet

USDA-FDA

View Safety Data Sheet

Description: Clear MCI® surface treatment for existing concrete. Designed to penetrate and migrate throughout the concrete structure. Patented.
Application: Water-based surface treatment. Provides MCI® corrosion protection for rebar in existing structures. Underwriter's Lab. NSF Standard 61 Certification for indirect contact with drinking water. Applications - bridges, buildings, garages, decks, and lanais.
Protection:150 ft2/gal (3.68 m2/l)
Package:5 gal (19 l) pails 55 gal (208 l) drums
View Product Data Sheet

View Safety Data Sheet

Description: MCI® passivating repair grout for protecting reinforcing steel in concrete. Patent Pending.
Application: Concrete repair.
Package:11 lb (5 kg) pails - resin 26.5 lb (12 kg) bag - powder
View Product Data Sheet

View Safety Data Sheet

Description: MilCorr VpCI Shrink Film is a heavy duty film featuring Cortec multimetal Vapor phase Corrosion Inhibitors (VpCI). MilCorr VpCI Shrink Film provides a top-notch universal protection system with high ultraviolet (UV) light protection to maintain the integrity of the film itself as well as the parts packaged within.
Protection:Outdoors
Package:Standard and custom sizes.
View Product Data Sheet

USDA-FDA

View Safety Data Sheet

Description: Plastic Emitter with breathable membrane 2.3" diameter x 1.27" H (58.4 mm diameter x 32.3 mm H).
Application: Operating, packaged and stored electrical equipment, marine navigation and communication equipment, aerospace electrical controls, electric motors, switching equipment, fuse boxes, medical equipment, electrical wireways, terminal boxes, scientific and measuring instruments, telecommunications equipment, control panels for manufacturing and processing equipment
Protection:11.0 ft3 (.31 m3).
Package:10/carton.
View Product Data Sheet

USDA-FDA

View Safety Data Sheet

Description: Vapor phase Corrosion Inhibitor (VpCI) 126 Series films combine the latest film technology with the most effective corrosion protection for all of your metal products. Sealing your product in Cortec VpCI films protects metal parts from all types of corrosion including rust, tarnish, stains, white rust, and oxidation for up to 5 years.* It’s as easy as putting your product in a Cortec VpCI package!
Protection:Varies
Package:Standard and custom size bags, tubing and sheeting.
View Product Data Sheet

USDA-FDA

View Safety Data Sheet

View SGS Report/RoHS Compliance Documents

Description: Cortec VpCI-126 Shrink Film, combines the latest film technology with the most effective corrosion protection for all of your metal products. Sealing your product in Cortec VpCI Shrink Film will protect a wide variety of metals from rust, tarnish, stains, white rust, and oxidation for up to 5 years.* It’s as easy as putting your product in Cortec VpCI- Shrink Film!
Application: • Will shrink up to 80% of original size • Multimetal corrosion inhibition providing contact, barrier, and vapor phase protection • Produced with industrial grade LDPE for superior mechanical properties (see chart) • Excellent sealing properties using sealing temperatures of 190-240OF • Will shrink using a wide variety of shrink tools • Excellent transparency (<10% Haze) • Excellent film for shrink tunnel applications (depending on temperature and dwell time) • Film is recyclable and non-hazardous
View Product Data Sheet

View Safety Data Sheet

Description: Cortec® VpCI-146 is the premium corrosion inhibiting paper in the industry. Our patented Vapor phase Corrosion Inhibiting (VpCI) technology has revolutionized the way metals are protected in an enclosed package. Cortec VpCI-146 paper provides superior corrosion protection for both ferrous and non-ferrous metals.
Protection:Varies
Package:Standard and custom
View Product Data Sheet

View Safety Data Sheet

View SGS Report/RoHS Compliance Documents

Description: Cortec® VpCI-149 is a unique corrosion inhibiting paper for the protection of a wide variety of metals. Formulated to provide extra protection to sensitive metals such as copper, aluminum, and cast iron, VpCI-149 is an excellent product for virtually all packaging needs. Manufactured using a neutral natural kraft paper, the coating provides a very soft and conformable feel to the paper. It wraps easily around metal parts, making for easy use during packaging. Since it is not a saturated paper will not tear like many other VCI papers.
Application: Cortec VpCI-149 paper can be used to protect products for storage and shipment in a wide variety of ways: the 149 Kraft wrap for single item packaging or interleaving; end closures for shipping tubes, insert strips for recessed areas in large packages, and as sheet liners or separators between products.
The typical applications are: • Metal producing: coils, wire reels, plate, bar, etc. • Metal forging and die casting: raw and machined forgings and castings. • Metalworking: stamping, sheet metal work, springs, bearings, fasteners, tube, pipe, nails, etc. • Finished products: engines, machinery , equipment, tools, hardware, appliances, instruments, motors, etc. • Electrical, electronic components, controls, etc.
Protection:Varies
Package:Standard and custom
View Product Data Sheet

View Safety Data Sheet

Description: Safe, convenient, ready-to-use vegetable oil/solvent-based liquid for general-purpose corrosion protection. Some applications include protection of sheet metals, wire, pipes, flanges and other fabricated and/or machined parts, guns and a host of other products. VpCI®-325 protects against corrosion and works as an excellent lubricant. VpCI®-325 performs effectively even under the adverse condition of 100% relative humidity and in the presence of such corrosive elements as chlorides, hydrogen sulfide and other sulfur compounds.
Package:5 gallons (19 liter) pails, 55 gallons (208 liter) drums, liquid totes and bulk.
View Product Data Sheet

View Safety Data Sheet

View SGS Report/RoHS Compliance Documents

Description: VpCI®-329 is a vapor corrosion inhibiting concentrate for use with lubricating, hydraulic and preservation oils. Provides excellent protection in sheltered outdoor/indoor conditions. VpCI®-329 protects in two unique ways by offering a tenacious film, which clings to metal surfaces, as well as vapor phase inhibitors into the air above the oil. The vapors condense and form a protective barrier on metal surfaces that are not in contact with the oil. This combination allows complete protection to internal system parts. Conforms to MIL-P-46002B, MIL-I-85062, MIL-C-16173D (Grade 3). VpCI®-329 F is FDA approved.
Package:5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk
View Product Data Sheet

USDA-FDA

View Safety Data Sheet

View SGS Report/RoHS Compliance Documents

Description:
VpCI-337 is a ready-to-use waterborne corrosion inhibitor for temporary protection. Vapor phase corrosion inhibitors in VpCI-337 migrate and protect metal surfaces, resulting in time and cost savings.VpCI-337 is used to protect the edges of coils and stacks or to fog void spaces, tanks, containers, packages, and enclosures. These laborsaving techniques use a minimum of product to protect large areas or volumes. VpCI-337 is effective on ferrous and non-ferrous metals as well as aluminum, plated steels, and copper. VpCI-337 is consistently successful in providing protection to the basic metals, metalworking, and packaging industries.In most cases, products protected by VpCI-337 are ready-to-use. No degreasing or stripping is necessary by most end users. The metal will retain a clean, rust-free surface. In most cases, the thin protective film will not affect paintability, conductivity, appearance, or any other important property of metals or alloys.VpCI-337 is also available in a cold weather version. VpCI-337 Winterized has a lower freezing point for the convenience of application and storage in cold temperatures.
Application:
• In-process protection
• Edge spray of coils and sheet stock
• Void spaces
• Double wall void spaces
• Fogging
Package:
VpCI-337 is packaged in 10-14 oz. net wt. (284-397g) recyclable aluminum cans (12/carton), 5 gallon (19 liter) plastic pails, 55 gallon (208 liter) metal drums, totes, and bulk.VpCI-337 Winterized is packaged in 5 gallon (19 liter) plastic pails, 55 gallon (208 liter) metal drums, totes, and bulk.Minimum storage temperature:
VpCI-337 12°F (-12°C)
VpCI-337 Winterized -26°F (-32°C)Maximum storage temperature:
120°F (49°C)Shelf life is 24 months.
View Product Data Sheet

USDA-FDA

View Safety Data Sheet

View SGS Report/RoHS Compliance Documents

Description: Waterborne corrosion inhibitor concentrate for indoor use based on proven vapor phase technology. Excellence for edge treating of coils and stacks and of fogging packages and enclosures. Particularly effective on ferrous metals, aluminum and tinplated steels. Also works as a cleaner/degreaser on steel or tinplate. USDA approved.
Package:5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk.
View Product Data Sheet

USDA-FDA

View Safety Data Sheet

Description: Environmentally friendly concentrated corrosion preventive liquid/metalworking lubricant for wet tempering of galvanized and cold-rolled steel, difficult-to-produce metal stampings, wire rope, tubular products and machine parts. VpCI®-344 prevents corrosion indoors for up to two years. This product can be removed with conventional alkaline cleaners. Can also be used as a coolant. Apply by dipping.
Package:5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk.
View Product Data Sheet

View Safety Data Sheet

Description: Liquid that provides corrosion protection for multimetals. Dilutable with water up to 1:40. Excellent lubricating and corrosion inhibiting properties. Replaces slushing oils on cold rolled and galvanized steel. For use as a metal-forming lubricant and synthetic machining coolant. VpCI®-347 is formulated for deep-draw applications.
Package:5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk.
View Product Data Sheet

View Safety Data Sheet

Description: VpCI®-369 is our best inhibitor for use as an oil additive and/or temporary coating. The protective film is self-healing and moisture-displacing, providing superior protection against aggressive environments. VpCI®-369 is also excellent when used as an oil additive for mothballing, shipping, or storage of parts and equipment. In small percentages, VpCI®-369 has a minimal effect on viscosities.
Application: • Wire rope • Electrical connections/wiring • Sheltered coating • Gear protectant/lubricant • Long-term (5+ years) equipment lay-up • Stamping oil additive • Drawing oil additive • Cylinders • Working/moving parts
Package:5 gallon (19 liter) plastic pails, 55 gallon (208 liter) metal drums and 11 oz. (312 g) aerosol cans.
View Product Data Sheet

View Safety Data Sheet

View SGS Report/RoHS Compliance Documents

Description: VpCI-377 is a water-based concentrate designed as a complete replacement for oil-based preventives for indoor protection of equipment and components. VpCI-377 is a corrosion preventive liquid that meets tough antipollution requirements. The wide dilution range with water (0.5-20%)* allows flexibility to customize the length of protection required and the applied cost per square foot (or m2).

VpCI-377 forms a solution in water and is applied to metal surfaces by spraying or dipping. VpCI-377 does not need to be removed, but if necessary, can be removed with conventional alkaline cleaners, such as Cortec’s VpCI-410 series.

VpCI-377 is also available in a cold weather version. VpCI-377 Winterized has a lower freeing point for the convenience of application ansd storage in cold temperataures.

*Contact Cortec Representative for dilution recomendations.

Application: Add VpCI-377 to water and mix thoroughly. Spray, dip, or use in parts washers and rinse tanks. Solution concentration can be monitored by a refractometer, pH and titration methods.

The pH of VpCI-377 needs to be above 8 in order to be effective.

Package:
VpCI-377 is available in 5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes, and bulk. The product should be stored sealed in a heated warehouse to avoid freezing.VpCI-77 Winterized is available in 5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes, and bulk.VpCI-377 is also available in EcoAir® compressed air cans (12 oz. / 340 g) bottles.Shelf life is 24 months.
View Product Data Sheet

View Safety Data Sheet

View SGS Report/RoHS Compliance Documents

Description: VpCI®-386 is a unique, water-based acrylic primer/ topcoat that successfully provides protection in harsh, outdoor, unsheltered applications. The complex mixture of non-toxic, organic inhibitors offers protection that can compete with most paints and zincrich primers.
Application: VpCI™-386 can be used as a topcoat/primer. When solvent-based topcoats are applied over VpCI™-386, compatibility must be checked. VpCI™-386 can also be used as a topcoat with Cortec® VpCI™-374 as a primer.
Package:5 gallons (19 liters) pails, 55 gallons (208 liters) drums, liquid totes and bulk.Contact [email protected] for specific color SDS
View Product Data SheetView Safety Data Sheet

Description: Effectively removes rust and tarnish from steel, iron, copper, brass and chrome. Non-polluting. Will not harm human skin or adversly affect most paints, plastics, wood, textiles, ceramics or rubber.
Application: Apply to concrete surfaces to remove rust stains. Organic, non-polluting, safe to handle.
VpCI-422 testing report: VpCI-422 testing.pdf
Package:5 gallons (19 liters), 55 gallons (208 liters), totes or bulk or EcoClean® 423, 16 oz. (0.47 liter) pump spray bottle.
View Product Data Sheet

View Safety Data Sheet

View SGS Report/RoHS Compliance Documents

Description: Proprietary corrosion inhibitor for boiler water systems. Water soluable, provides long-term protection against corrosion and scale formation. Suitable for low to medium pressure boilers.
Package:5 gallons (19 liters), 55 gallon (208 liters), totes and bulk.
View Product Data Sheet

USDA-FDA

View Safety Data Sheet