VpCI® for Oil, Gas and Process Industries

 

Click on the links below to access product descriptions and other information regarding various VpCI® (Vapor Phase Corrosion Inhibitor)/MCI® (Migrating Corrosion Inhibitor) product lines.
Description: Provides internal corrosion protection for gas flow and gas transmission lines. Effective against water, corrosive gases and chloride contamination.
Package:5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation
Description: CorroLogic™ VpCI®-637 TOL provides corrosion control in natural gas and crude oil gathering and transmission lines, including the difficult Top-of-Line (TOL) corrosion problems. CorroLogic™ VpCI®-637 TOL is a combination of vapor phase and film-forming corrosion inhibitors. It is particularly useful in combating the corrosion caused by condensation of acidic vapor in areas inaccessible by direct contact. It also provides excellent protection to Bottom-of-the-Line (BOL) corrosion caused by corrosive fluids. CorroLogic™ VpCI®-637 TOL is able to partition through hydrocarbon to reach aqueous phase, and to function in a variety of flow reigns. The unique chemistries of CorroLogic™ VpCI®-637 TOL enable the product to protect internal pipelines in “sweet/sour” saturated carbon dioxide/hydrogen sulfide environment.
Application: CorroLogic™ VpCI®-637 TOL is designed for use in natural gas pipelines and petroleum recovery processes, most effective in situations prone to TOL corrosion attacks.
Package:CorroLogic™ VpCI®-637 TOL is available in 5 gallon (19 liter) containers, 55 gallon (208 liter) metal drums, liquid totes, and bulk. Products should be stored in tightly closed containers.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description:
CorroLogic VpCI Filler is a custom designed 2-part product developed to fill the inside of closed environments such as pipeline casings and the inside of tubular tower structures, etc. in order to control corrosion for long time periods. The product contains a unique blend of Cortec Vapor phase Corrosion Inhibitor (VpCI) technology while providing resistance to bacterial corrosion. The filler also prevents the infiltration of air and water inside the filled structures.CorroLogic VpCI Filler consists of a liquid VpCI concentrate and a powder gelling agent. The liquid VpCI component (Part A) can be diluted on-site to the appropriate concentration. The powder gelling agent (Part B) is added just prior to application and causes an increase in viscosity and ultimately gel formation over a pre-determined time period.
Application:
CorroLogic VpCI Filler is applied by adding the liquid VpCI concentrate to water in a mixing tank, thoroughly blending, then adding a controlled quantity of the powder gelling agent into the liquid stream as it is discharged from the mixing tank. The CorroLogic VpCI Filler is then pumped into the structure until it is filled to the desired level. After application, the CorroLogic VpCI Filler will setup and gel over a predetermined period of time. Contact a Cortec representative for the recommended mix ratio.
Package:
Part A is available in 5 gallon (19 liter) pails, 55 gallon (208 liter) drums, and bulk. Store in a heated warehouse to avoid freezing.Part B is available in 50 pound (23 kg) and 100 pound (45kg) moisture barrier, fiber-lined drums. Store in a sealed container in a dry warehouse and avoid direct exposure to sunlight with temperatures not exceeding 150°F (65°C).
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Corrosorber Liquid - Cortec CorporationDescription:
Corrosorber Liquid is a concentrated solution of nitrogen based heterocyclic compound. It is formaldehyde free and can be used to scavenge hydrogen sulfide (H2S), mercaptans, sulfides, and sulfur compounds from gas systems or liquid hydrocarbons. Corrosorber liquid is an extremely fast reacting product allowing for lower levels of treated H2S where contact time is restricted. Faster reaction kinetics allow for lower usage of treating chemical.
Application:
Hydrogen Sulfide is a poisonous gas that is deadly at high concentrations and provides serious health threats at moderate concentrations. Operating problems caused by H2S can include severe corrosion and fouling, and injection well plugging with iron sulfides.Corrosorber Liquid is installed in batch reaction towers or it is injected continuously into gas gathering lines, transmission lines, vapor overheads, or liquid product systems of pipelines. It can be applied in either flowline or bubble tower applications. Typically the bubble tower should be filled to approximately 50% full to prevent the product from being carried downline.Corrosorber Liquid can be diluted with water or methanol for ease of application. Water containing reacted product can be reused in the water cycle, including water gathering lines, water tanks, holding pits, vapor overheads, or injected down disposal wells.
Package:
Corrosorber Liquid is available in 5 gallon (19 liter) pails and 55 gallon (208 liter) drums.Do not store above 120°F (49°C). Keep container closed and upright.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: Eco Flow® is a two component, single dosing system specifically designed for pipelines carrying water or a mixture of hydrocarbon and water. The Eco Flow® system is a combination of chemicals formulated for optimal benefit of prime additives for water treatment, blended in well determined concentrations to obtain maximum performance.
Application:
Eco Flow Inhibitor
• Effective for a wide range of systems and corrosive conditions
• Provide maximum control over long distances for highly corrosive systems having a high ratio of waterto- hydrocarbons, including low areas in systems where water collects and extreme corrosive attack occurs
• Form an adsorbed, protective layer that protects ferrous and non-ferrous metals
• Effective against water, corrosive gases, and halogens
• Vapor phase action provides protection from atmospheric conditions and moisture condensation to areas not accessible by filming inhibitors
• Combines anti-corrosion and antiscalant properties
• Resists to biological attacks
• Environmentally friendly
• Does not contain heavy metals, chlorinated hydrocarbons, or volatile amines
Eco Flow Enhancer
• More than 60% drag reduction depending on conditions and systems
• Increased flow rates while maintaining current operating pressures
• Maintains flow while reducing operating pressures
• Less polymer is required to achieve a given performance
• Lower injections rates than traditional drag reducers
• Faster dissolution rates than traditional drag reducers
• Reduces potential internal corrosion through erosion
• Can be used in two-or-three-phase systems
• Drag reduction achieved in water-oil systems with over 50 % oil
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: M-408 is a corrosion inhibitor for brake fluid. It is compatible with DOT 3, 4, and 5 brake fluids, but is especially effective in silicon based brake fluids, such as DOT 5. M-408 dramatically improves corrosion protection of brake systems and does not adversely affect other properties of DOT-5 brake fluid, including flammability, high and low temperature serviceability, dry and wet boiling points, and compressibility. M-408 is very economical. When added to DOT-5 brake fluid, at a concentration level of 1-1.5% by weight, it provides corrosion protection for ferrous and yellow metals in conditions of high humidity and elevated temperatures.
Application: • Economical • Prevents corrosion of the brake system • Extends the life of the brake system • Compatible with the majority of brake fluids
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

M529 - Cortec CorporationDescription: M-529 is an oil-based package of corrosion inhibitors for lubricating, hydraulic oils or engine oils.
Package:5 gallon (19 liters) pails, 55 gallon (208 liters) drums, liquid totes and bulk
Recomended Usage:1.5-5%
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description:
M-531 is an oil-based package of corrosion inhibitors for petroleum and synthetic lubricants. M-531 provides outstanding non-staining properties with excellent demulsiblility and filterability. M-531 is very effective for napthenic, iso-paraffinic, PAO, etc. based lubricants.
Application:
M-531 can be used in a wide variety of industrial lubricant applications where excellent rust protection, filterability, and water resistance are required. In rust preventive applications it is particularly useful for coiled steel or stacked parts due to its outstanding non-staining properties.M-531 is highly recommended for use in hydraulic fluids. M-531 is also ideally suited for formulating paper machine oils and circulating oils where good filterability, anticorrosion, thermal stability, and demulsification properties are required.
Protection:
• Carbon steel
• Copper
• Solder
• Stainless steel
• Cadmium
• Tin
• Galvanized steel
• Magnesium
• Lead
• Aluminum
• Silver
• Bronze
• Brass
• Zinc
Package:
M-531 is available in 5 gallon (19 liter) plastic pails and 55 gallon (208 liter) metal drums.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: M-615 is an additive to low and medium pressure boilers. It will provide improved heat transfer efficiency and longer equipment life by keeping the system free from corrosion attack and harmful insulating deposits. This product contains corrosion inhibitor and anti-scalants, and can be combined with other boiler additives (oxygen scaengers, nuetralizing amines, etc.).
Application: • Protects against pitting • Reduces maintenance time and costs • Very economical low dosage • Liquid form delivery for easy, direct application to system without premixing • Extends boiler system life • Easy to control treatment program • Provides protection to ferrous metals, aluminum alloys and galvanized steel
Protection:The recommended dosage of M-615 (75-250 ppm) will depend on several factors such as boiler pressure, feed water, hardness, etc. Please contact Cortec for recommendations.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: M-645 is a newly developed corrosion inhibitor additive for corrosion induced by seawater or brine. M-645 is a highly surface active concentrate, which will displace water containing chlorides from the metal surface, is then adsorbed forming an oily protective film on the metal. This film is the most uniform when it is applied in conjunction with an oxygen scavenger.
Package:M-645 is available in 5 gallon (19 liter) pails, 55 gallon (208 liter) metal drums, liquid totes and bulk.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: Corrosion inhibitor for steam condensate lines in boiler systems.
Package:5 gallons (19 liters), 55 gallon (208 liters), totes and bulk.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: S-10 F is a non-toxic “green” filming corrosion inhibitor for boiler condensate. This inhibitor is effective against corrosion caused by carbon dioxide and oxygen. S-10 F is very useful in facilities where safety concerns limit the concentration of amines allowed in steam lines. The active ingredient of S-10 F is the sodium salt of fatty amino acids.
Package:5 gallon (19 liter) plastic pails, 55 gallon (208 liter) metal drums, liquid totes and bulk.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: Additive for acid systems such as industrial cleaning solutions and hot pickling baths
Application:
S-11 prevents corrosion in mineral acids, such as nitric, hydrochloric, sulfuric and phosphoric.S-11 Org is especially effective in organic acids such as acetic, citric, formic, tartaric, also in sulfamic, phosporic acids, and EDTA.S-11/S-11 Org do not affect the pH level so it will not affect the technological processes. Usually, S-11/S- 11 Org are used at a concentration level of 0.1-1.0% by weight of total formula, and can be post-added if desired.The concentration of inhibitor required depends on the concentration of the acid and operation conditions. In general, S-11/S-11 Org are effective at low concentrations, but at temperatures over 200O F (93O C), higher concentrations of S-11/S-11 Org corrosion inhibitors may be needed (0.50-1.0% for S-11 and 1- 4% for S-11 Org). However, the most effective concentrations are best determined by laboratory tests.
Package:5 gallons (19 liters), 55 gallons (208 liters),
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: S-11 Org is a corrosion inhibitor for aqueous systems with low pH level.
Application:
S-11 prevents corrosion in mineral acids, such as nitric, hydrochloric, sulfuric and phosphoric.S-11 Org is especially effective in organic acids such as acetic, citric, formic, tartaric, also in sulfamic, phosporic acids, and EDTA.S-11/S-11 Org do not affect the pH level so it will not affect the technological processes. Usually, S-11/S- 11 Org are used at a concentration level of 0.1-1.0% by weight of total formula, and can be post-added if desired.The concentration of inhibitor required depends on the concentration of the acid and operation conditions. In general, S-11/S-11 Org are effective at low concentrations, but at temperatures over 200O F (93O C), higher concentrations of S-11/S-11 Org corrosion inhibitors may be needed (0.50-1.0% for S-11 and 1- 4% for S-11 Org). However, the most effective concentrations are best determined by laboratory tests.
Package:S-11 Org is available in 5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: General purpose water treatment antiscalant. Nonflammable and nontoxic
Package:5 gallons (19 liters), 55 gallon (208 liters), totes and bulk.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: S-14 Bio is a unique building block designed for cooling towers and other open-loop, recirculating cooling systems. S-14Bio is a rare combination of a powerful scale inhibition and excellent multi-metal corrosion protection. It is comprised of non-toxic, non-hazardous, and readily biodegradable ingredients. Its main component is a low molecular weight natural polymer, and all the other components are GRAS (Generally Recognized as Safe) substances and food approved preservatives.
Package:5 gallon (19 liter) containers, 55 gallon (208 liter) metal drums, liquid totes or bulk.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: It is critical to minimize corrosion and deposits in the boiler systems in order to maximize energy efficiency and life span. The gases typically dissolved in water, such as oxygen and carbon dioxide, lead to corrosion. Oxygen causes pitting and rusting while carbon dioxide causes acid corrosion. S-15 is effective in controlling corrosion caused by oxygen and carbon dioxide in high and medium pressure boilers and condensate lines.
Package:5 gallon (19 liter) containers, 55 gallon (208 liter) metal drums, liquid totes or bulk.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: Defoamer for aqueous and non-aqueous systems. Specially selected for use in combination with Cortec® water-based and oil-based inhibiting systems. Stable under both acidic and basic conditions. Silicone-based.
Package:5 gallons (19 liters), 55 gallon (208 liters), totes and bulk.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: Blend of solvents, dispersants, surfactants and emulsifiers for treatment of fuel oil grades #2, #4, #5 and #6.
Package:5 gallons (19 liters), 55 gallon (208 liters), liquid totes and bulk.
View Product Data Sheet

  • S-49.pdf
View Safety Data Sheet

Productpapers - Cortec Corporation

Description: An all organic liquid additive formulation designed for low level concentrations which contain a unique combination of contact and vapor phase inhibitors.
Package:5 gallons (19 liters), 55 gallon (208 liters), totes and bulk.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: Oxygen scavenger designed to protect boiler systems against oxygen corrosion (hydrazine-free).
Package:5 lb. (2.3 kg), 50 lb. (23 kg), 100 lb. (45 kg).
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: S-8 is a unique product formulated only from ingredients. It can be used in very low concentration and still provide complete corrosion protection in water, its vapors and their interface. This product is especially useful for the corrosion protection of metallic cans with different food items during their washing or sterilization of the packed food. S-8 is a non-toxic “green” filming corrosion inhibitor. Sodium salt of fatty amino acids and amino alcohol are the active ingredients of S-8. S-8 provides excellent corrosion inhibition. Benchtop laboratory tests show outstanding film persistency and stability in a wide temperature range. S-8 is compatible with the majority of water chemistries. S-8 outperforms other “green” inhibitors due to its stability and ability to form a thin protective layer that will not cause sticky deposits.
Application: FEATURES
• Economical • Compatible with most products used in water treatment • Efficient against corrosion in the presence of disinfectant • Does not hydrolyze during the application
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: VpCI®-329 is a vapor corrosion inhibiting concentrate for use with lubricating, hydraulic and preservation oils. Provides excellent protection in sheltered outdoor/indoor conditions. VpCI®-329 protects in two unique ways by offering a tenacious film, which clings to metal surfaces, as well as vapor phase inhibitors into the air above the oil. The vapors condense and form a protective barrier on metal surfaces that are not in contact with the oil. This combination allows complete protection to internal system parts. Conforms to MIL-P-46002B, MIL-I-85062, MIL-C-16173D (Grade 3). VpCI®-329 F is FDA approved.
Package:5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk
View Product Data Sheet

USDA-FDA

View Safety Data Sheet

View SGS Report/RoHS Compliance Documents

Productpapers - Cortec Corporation

Description: VpCI®-609 is a water-soluble Vapor phase Corrosion Inhibiting (VpCI®) powder for wet or dry corrosion protection of ferrous metals and aluminum.
Application: • Tubular structures, pipes and vessels • Internal surfaces of compressors, turbines, engines, tanks, boilers, heat exchangers • Steam condensate lines, closed circuit heating and cooling systems • Equipment during and after hydrostatic testing • Parts, components and completed assemblies during shipping and storage • Additive to shot-blasting media, wet blasting • Additive to standing water • Voids, cavities and tanks
Protection:Provides up to 24 months of continuous protection.
Package:5 lbs. (2.3kg), 50 lbs. (23kg), 100 lbs. (45kg) moisture barrier bags packed in fiber-lined drums.
View Product Data Sheet

View Safety Data Sheet

View SGS Report/RoHS Compliance Documents

Productpapers - Cortec Corporation

Description:
Water-based rust preventive concentrate for water blasting or wet abrasive blasting. It leaves a very thin, transparent, tack free film on the metal surface. Weldable and paintable film is non-toxic, pro-environmental and contains no nitrite or phosphate inhibitors.
Package:5 gallons (19 liters), 55 gallon (208 liters), liquid totes and bulk.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: Proprietary corrosion inhibitor for boiler water systems.
Package:5 gallons (19 liters), 55 gallon (208 liters), totes and bulk.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: Proprietary corrosion inhibitor for boiler water systems. Water soluable, provides long-term protection against corrosion and scale formation. Suitable for low to medium pressure boilers.
Package:5 gallons (19 liters), 55 gallon (208 liters), totes and bulk.
View Product Data Sheet

USDA-FDA

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: A water-based protective coating for metal surfaces that will be subsequently covered with thermal insulation. High temperature resistant formulation.
Package:5 gallons (19 liters), 55 gallons (208 liters), totes and bulk.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: VpCI®-629 Bio is the only product on the market of oilfield inhibitors which combines high level of corrosion protection, biodegradability and low toxicity.
Package:VpCI®-629 Bio is packaged in 5 gallon (19 liter) plastic containers, 55 gallon (208 liter) metal drums, liquid totes and bulk. Store product in tightly closed containers. Shelf life is 36 months.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: Concentrated additive forms a persistent inhibitive layer to protect the internal surfaces of pipelines, tanks, valves, etc. Used for transportation and storage of hydrocarbons and corrosive fluids. Also available in a super-concentrated version.
Package:5 gallons (19 liters), 55 gallon (208 liters), totes and bulk.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: Provides internal corrosion protection for gas flow and gas transmission lines. Effective against water, corrosive gasses and chloride contamination.
Package:5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: VpCI-639 is designed to provide corrosion protection against the severe conditions encountered in petroleum production and refining. VpCI-639 is effective for a wide range of refined hydrocarbons, crudes, and oil/water ratios. As a fast acting longterm corrosion inhibitor, VpCI-639 forms an effective anti-corrosion barrier for metals in the presence of water, halogens, and corrosive gases such as dissolved oxygen, sulfur dioxide, carbon dioxide, and hydrogen sulfide.
Application: VpCI-639 is designed for use in offshore equipment, wells, pipes, pipelines, refineries, tankers, production and storage tanks, and chemical plants.
Package:VpCI-639 is available in 5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes, and bulk.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: Water-based rust preventative for the protection of ferrous or nonferrous metals in industrial waters.
Package:5 gallons (19 liters), 55 gallon (208 liters), totes and bulk.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: Vapor Phase technology based treatment protects cooling and industrial process systems against corrosion, scale and fouling.
Package:5 gallons (19 liter), 55 gallon (208 liter), totes and bulk.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description:
VpCI-649 is a unique concentrated liquid formulation that protects ferrous and non-ferrous metals from corrosive solutions. In addition, this product is designed to provide long-term protection in fresh water and glycol closed loop systems.VpCI-649 is effective as a replacement for nitrite, bromate, and/or chromate-based formulations.VpCI-649 combines contact and volatile corrosion inhibitors along with anti-scalants in non-toxic formulation that does not contain nitrites, phosphates, chromates, or heavy metals. This product helps solve the problem of disposal, particularly for large quantities of water.VpCI-649 is also available in a cold weather version for the convenience of storage in cold temperatures.
Application:
• Inhibitor for closed loop cooling systems
• Fire extinguishing systems
• Inhibitor for hydrostatic testing of pipelines, casings, tanks, and valves
• Inhibitor for packer fluid applications
• Prevents water-bottom corrosion in oil storage tanks
• Alkanolamine sweeteners
• Pulp and paper process equipment
• Mines, mining, and earth moving equipment
• Inhibitor for lay-up application of cooling towers
Package:
VpCI-649 is available in 5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes, and bulk. The product should be stored in tightly closed containers. Shelf life is 18 months.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: Vapor phase technology based cloosed loop treatment system that is nitrate, borate, chromate-free and environmentally safe.
Package:5 gallons (19 liter), 55 gallon (208 liter), totes and bulk.
View Product Data Sheet

View Safety Data Sheet

View SGS Report/RoHS Compliance Documents

Productpapers - Cortec Corporation

Description: VpCI-705 Bio is specially formulated for use as a multifunctional fuel additive to biodiesel and other biofuels. It serves as a corrosion inhibitor, fuel stabilizer, and water emulsifier for biodiesel, diesel, and gasoline. VpCI-705 Bio provides corrosion protection, lubricity and elastomer protection for biobased fuels.
Package:VpCI-705 Bio is available in 5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation

Description: Corrosion preventive additive for gasoline, diesel, gasohol mixtures and alcohol fuels that also works as a fuel stabilizer and water emulsifier. Soluble in methanol blends as well as neat methanol fuel or neat gasoline.
Package:5 gallons (19 liters), 55 gallon (208 liters), totes and bulk.
View Product Data Sheet

View Safety Data Sheet

Productpapers - Cortec Corporation